If you want to establish a successful wireless connection between the Canon printer and the other devices, it is very important to complete the configuration correctly. You can do this by following the ij.start.canon/ts3322 setup link. If you are using the WPS connection, you do not need to input a password to connect your printer to the internet. WPS connection is the simplest method because all you need is to turn on the Wi-Fi and choose the available network. You can also go with a standard connection method depending upon your choice and requirement. In this guide, we are going to share the simple instructions that will help you to complete the Canon set up on your device you are doing using the WPS connection method. There are certain requirements to use the WPS push button:
Once you got all the information regarding the WPA or WPA2, you can proceed with the mention guidelines to proceed with the printer setup process:
The above steps will only help with hubs or routers that are supporting WPS protocol. If you are unable to establish a successful Wi-Fi connection following this guide, you can visit ij.start.canon/ts3322 setup for help. However, if you follow this guide carefully, you would be able to establish a successful Wi-Fi connection to your printer. To check the Wi-Fi connectivity on your printer, follow the steps below:
These tips will help you to check the Wi-Fi network connectivity and make sure that your device is successfully connected to the network and able to print the documents. To download the latest drivers, you need to visit ij.start.canon TS3322 setup then you can download them from there. However, if you find the setup process difficult to complete, you can always contact the Canon experts and take their help to complete your printer setup.
0 Comments
Leave a Reply. |
|